Make a donation
Cart Account
Free Sound Effects - Download 3,500+ Royalty-Free Sounds

← All enclosures and cases

Exposi'Son cylindrical enclosure

Exposi'Son · 3D printing · by Joseph Sardin

The three versions of the cylindrical enclosure, closed, on their feet: speaker in green (grille lid), resonator in purple (solid lid) and, in front, the lower jack version in orange (3D drawing)

A small round 3D printed box for the Exposi'Son, designed for exhibitions: closed on every side, it only lets the sockets out. Its lid screws on like a jar lid, and it opens halfway up.

It comes in three versions. For headphones or an amplifier, the jack version: a bottom that lets the jack socket and the USB-C socket through, and a flat lid, 51 mm across and 26 mm high. For the 3 W speaker, a bottom that only lets the USB-C socket through and a taller lid, drilled with a grille, with the speaker glued underneath: 44 mm high. For the resonator, the same bottom and a solid lid, a little lower (41 mm): the resonator glued underneath makes the lid vibrate, and the lid spreads the sound.

No control can be reached from the outside. A short wire screwed into both terminals of terminal block "1" plays all the sounds in a loop as soon as the USB-C socket is plugged in. The volume is set before closing, and the microSD card is changed with the box open. An optional small screw locks the lid so that visitors cannot unscrew it.

Four flexible feet, printed separately, slip under the box and add 3 mm. They are drilled, like the bottom: four screws, 30 mm apart, fix the box flat on a piece of furniture or on a wall. You screw it in empty, from the inside, then put the board in.

Every part prints without supports. The FreeCAD file and the script that draws it let you change everything.

At a glance

For
Exposi'Son
Board versions
V6.4
Technique
3D printing
Material
PLA or PETG; feet in TPU (flexible filament)
You will also need
3 M3 screws, 6 to 8 mm long, to hold the board.
A short wire to link both terminals of terminal block "1".
A little hot glue for the speaker or the resonator.
1 M3 screw to lock the lid (optional).
4 countersunk 3 mm screws to mount the box (optional).
Maker
Joseph Sardin
License
CC BY-SA 4.0

Download

Everything in a single ZIP file: photos, source files and a sheet saying who made it and under which license.

13 files · ZIP · 5.1 MB

Source files

FileWhat it is forFormatSize
Boitier-cylindrique-Fond-jack.stlBottom of the jack version (jack and USB-C sockets), print with the bottom on the bedSTL1022 KB
Boitier-cylindrique-Couvercle-plat.stlFlat lid of the jack version, print with the top on the bedSTL484 KB
Boitier-cylindrique-Fond-haut-parleur.stlBottom of the speaker and resonator versions (USB-C only), print with the bottom on the bedSTL992 KB
Boitier-cylindrique-Couvercle-haut-parleur.stlTall lid with a grille, for the 3 W speaker, print with the top on the bedSTL1.5 MB
Boitier-cylindrique-Couvercle-resonateur.stlTall solid lid, for the 3 W resonator, print with the top on the bedSTL522 KB
Boitier-cylindrique-Patin-TPU.stlFoot, print 4 of them in a flexible filament (TPU)STL222 KB
Boitier-cylindrique.fcstdThe three assembled boxes, FreeCAD fileFCSTD306 KB
boitier.pyFreeCAD script that draws every part; the measurements are set at the top of the file (comments in French)PY19 KB

Have you built an enclosure for one of my boards? Send me your photos and files and I will add it, with your name.

- Joseph SARDIN - Founder of BigSoundBank.com - About - Contact