← All enclosures and cases

Ambi'Son wooden protection kit

Ambi'Son · Laser cutting · by Joseph Sardin

❮ ❯

Two laser-cut wooden plates sandwich the board, held at the four corners by M3 spacers and screws. An opening in the top plate lets you press the PLAY button, through a wooden button. The potentiometer, the microSD card, the USB stick, the power socket and the jack stay reachable from the sides.

Each corner, from bottom to top: screw, foot (the screw head fits inside), bottom plate, 4 mm spacer, board, 18 mm spacer, top plate, screw. The button is made of two glued parts: a 15 mm disc resting on the PLAY button, under the plate, and on top the offcut of the opening.

This is the kit offered as an option with the Ambi'Son, to assemble yourself. The files also let you cut it yourself: the plates in 3 mm MDF (or 3 mm plywood), the button disc in 5 mm plywood. They come in two widths: 78 × 55 mm, the outline of the board, and 84 × 55 mm, 3 mm wider on each side for boards whose sockets stick out past the edge. The dimensioned drawing gives every measurement and the assembly.

At a glance

For

Ambi'Son

Board versions

V12bis, V14

Technique

Laser cutting

Material

3 mm MDF (or 3 mm plywood); 5 mm plywood for the button; 3D printed feet

You will also need

8 M3 screws, 6 mm long.
4 M3 spacers, 4 mm, female / male.
4 M3 spacers, 18 mm, female / female.
A little wood glue for the button.

Maker

Joseph Sardin

License

CC BY-SA 4.0

For sale

See it in the shop →

Download

Everything in a single ZIP file: photos, source files and a sheet saying who made it and under which license.

Source files

Have you built an enclosure for one of my boards? Send me your photos and files and I will add it, with your name.

- Joseph SARDIN - Founder of BigSoundBank.com - About - Contact